MIG Welder

Description:

1. The MIG/MMA-140A 4 in 1 welding machine is a lightweight and ultra-portable a multifunctional welder that connects to 120/220  volt power. The intuitive user interface, easy setup and weld in no-time.
2. This wire feed welder is an excellent choice for Flux-Cored welding, gas welding ,also suitable for Stick welding, Lift Tig welding.
3. Flux core weld: Synergic adjustment function, even a beginner can easily use it.
4. When use Flux core welding function, the fine tune voltage knob is generally in the middle position, fine tune +/-2V.
5. Stick weld functions: Built-in Hot-start makes the arc striking easier, Arc-force provide smoother welding and deeper penetration, Anti-stick easy the electrode removal from the workpiece.
6. Auto protection against over heat, over current, and short circuit, feel free to use, it’s very safe.
7. Outstanding Arc stability with low spatter and deep bath.
8. It is capable of welding carbon steel workpieces with E7018, E6013, and E6011 electrodes in stick welding mode.

Lift TIG welding is commonly used in industrial fabrication for welding of various metals like stainless steel, aluminum, and copper. The process is ideal for welding thin materials as it produces a precise and clean weld without distortion. Lift TIG welding is also used in the fabrication of pressure vessels, heat exchangers, and other critical components that require high-quality welds.
Used on the following alloys:
1. Mild and low alloy steels.
2. Stainless steels.
3. Some high nickel alloys.
4. Some wearfacing/surfacing alloys.

Description:

1. This welder machine is unique dynamic characteristics controlling cycle, stable welding arc,less plash, nice appearance, high welding efficiency.
2. Designed as closed loop feedback system,with high electricity wave resistant ability, it can output stable voltage.
3. MIG Flux Core Wire: 0.03”/0.8mm, 0.035”/0.9mm, Max:10LB.
4. MIG Solid Wire: 0.03”/0.8mm, Max:10LB.
5. Stick: Ideal for E6011, E6013, E6014, E7018 and rods below 1/5 inch.
6. Lift Tig:Tungsten Electrode below 5/32inch.
7. The spool gun function makes welding more convenient, and the wire can be easily changed without opening the machine, which can effectively save time.
8. Suitable for Gasless Flux Core/Gas MIG Welding and Aluminum MIG Welding.

Description:

Advanced MCU technology digital control achieves intelligent synergic welding with accurate current preset and keeps the welding process stable and working in perfect harmony for premium welding results.
Parameters can be preset and the data can be stored, which is convenient for the next welding. You can set 40 groups parameters as your requirement (MIG/lift TIG/MMA/Spool Gun, each mode can be set to 10 groups).
It also can be automatic save of last welding parameters.

Description:

1. This is a multifunctional welding machine,suitable for MMA, Lift TIG, flux MIG, gas MIG,Spot welding ,5 welding modes for you to choose.
2. Synergic adjustment function,even a beginner can easily use it.
3. Equipped with overload and overheating system,feel free to use,it’s very safe.
4. Lift TIG is available.
5. The welding machine utilizes IGBT half-bridge inverter technology.

Description:
1. Multifunctional 5-in-1 Welder: Support no gas flux core wire mig weld and gas mig weld, stick weld, spot weld and lift tig weld.
2. Synergic Control: The voltage & wire feeding speed can change automatically by adjusting amperage. Also you can adjust the welding current according to your welding habit.
3. Simple control panel: Provides you with simple button control,easy to choose which one you need function.
4. MMA Functions: Built-in hot start, arc-force, anti-stick.
5. Capable of Welding Aluminum: Can be used with MIG gun with graphite wire feed tube for aluminum function.
6. Continuous Welding: Up to 250 A output that allows to weld mild steel up to 9/32 in plate.
7. Safety Protection: Automatic compensation for voltage fluctuation, over-current protection, over-load protection and over-heating protection.
8. Parameter Storage: 10 sets of parameter data can be set for each welding mode, making the next welding more convenient.
9. Dual Voltage 110V/220V: Equipped with dual voltage 110V/220V input power supply and adapter, which can automatically match the voltage.
10. Cooling: The cooling fan only runs when working, which effectively reduces noise, saves energy and prolongs the life of the welder.